Can you do this with multiple preamps? I want to connect my Mackie Onyx What means direct monitoring does this help, when recording tguitar o a track? Hey Graham, I have the and After setting up, I hear cracks and clicks…. I tried making the ADA the slave adding a second toslink and the crackling went away but there was a hum. I continued to try changing the settings in Pro Tools LE but now slave or master I get nothing but cracks and clicks.

Any Ideas? Buenas tardes, desde las Islas Canarias. Se enciende, pero el firewire no y los drivers no la reconocen. Muchas gracias anticipadas.

Hi, thanks for the vid. Could you tell me how it is possible to set the soundcard as master clock? Do you need 2 lightpipe cables and a word clock BNC cable connected between the 2 devices to do that? Which one is better? I got an ADA based on the word of a few of my favorite recording gurus.

Once I put the thing into my rack and connected it via optical to my Pro40, the thing sounded like hot garbage. Can anyone tell me….

Im pretty sure some kind of signal should pass through by mic in ada then out into mixer! Without computer etc.. Who in their right mind would use a Behringer with a Digi ? Basicaly i need to know once i connect the ada up to my existing 8 channel rack,will i have a total of 16 inputs to record into,8 optical adat and 8 line in protools inputs.

Meaning are you able to use the 8 channel mic pre along with the so that you are running MORE than 8 channels in one recording? This is great! Does it matter which piece of hardware is master of the clock source? Hei Matt.. Thanks for your video. As my son is interested in recording the audio so I bought BM and tried to set it up. Facing some issue with Asio4All. When I open Ableton live then am not able to listen audio on you tube.

Tried with some suggestions posted on Ableton live group. So I have decided to buy Scarlet 2i2 and ordered it today. But now the question is once my lap top is connected to Scarlet, opened both ableton live and you tube. Can I swap between them to watch on you tube and do some thing on abletonlive without any other configuration changes either on Laptop or on Abletonlive sound setup. Appreciate if you clarify me on this.

Thanks once again. Can i use An 8 mic preamp with Adat out to my presonus vsl interface that has Adat in? I thought Apollo has to be the master. I have a question about connecting 2 ADA through optical and then to my , is that possible!?

I have a signal from my gitar to the Focusrite, but no sound other than the testsound if I choose MME as drivertype. I have vision problems and the font is too tiny for me to see what it says. I want to ask a question. I can hear my recording with direct monitoring through my head phones when Im tracking it but theres no playback when I wanna listen to it.

I did change the Master in the back of the I am a bit new to this but when I plug everything in as you have it, I lose the interface and it goes to Airplay. Can you help me with this? If i connect my laptop to a external monitor through HDMI, should I keep the audio interface connected to the laptop or monitor? Just got Ableton. I have watched several videos. I appreciate how clearly you present in your video and how easy your workflow is to follow.

Could you make a video on understanding the basics of Ableton, or perhaps you have one already? I am moving over from logic and have no clue as to where to begin. Most videos are too basic for someone who has used a DAW before, but it is harder making the switch. Is there a limit to how many mics I can record in a live session at the same time?

Pro tools only allows 4 with the basic software. Do I only need to plug it in via usb for my pc to get the signal? I must have another setting wrong. Is there another setting that is effecting it? Hi Graham, I have a digi and use a Avalon pre amp AD I was told by the store to simply use a cable from the the Avalon out put to the the input of the digi -I use input because it is a 2 channel pre amp.

Watching your video on how you did it is what I was told completely wrong? Could what I do give me a bad vocal signal? Hope you can give me some help Kind regards Josh. Doesnt get recognized instantly and switch to it? Jesse, thank you so much!

I love your easy, step-by-step approach and your short, to the point videos! Thanks again. Anyone know anything about this? The last interface worked just fine. The thing is when I am trying to record my ableton records the backing track channel for some reason. And when I put that channel on 1 and the recording channel on 2 it gives me only one side of my headphone as playback! Thank you so much! I was so frustrated because Ableton wasnt recognising my focusrite, and all I had to do was switch the driver type to ASIO like you said.

Thank you, your video was very helpful for me! Cheers bud. I need help big time,can u help me? Hi Graham. I know that this is an old video, but the logic is still there.

Please correct me if this is wrong. With this said… I purchased a cable and cap, and have hooked it up. I assume that I can use the same logic that you did here, and select the appropriate clock source for each component??? Does it hurt anything to do it this way?

I am ready to start just the sound does not happen it just stays on my digital piano. How do I hook up my digi and a behringer x USB mixer to work together?

User profile for user: Mykels3 Mykels3. Is Logic Pro X compatible with Digi ? Reply I have this question too I have this question too Me too Me too. All replies Drop Down menu. Loading page content. User profile for user: Peter Bjargo Peter Bjargo. The controllers on the surface is, still, not working though.

Reply Helpful 2 Thread reply – more options Link to this Post. Reply Helpful Thread reply – more options Link to this Post. Jul 19, AM in response to Mykels3 In response to Mykels3 The sliders and controllers on the surface version has never worked with Logic. User profile for user: fred Lupin fred Lupin. Mar 2, AM in response to Mykels3 In response to Mykels3 It s a problem for me to upgrade from my late macbook Core2Duo 2,16ghz system running snow leopard and protools 7. Another problem : command 8 seems not to be supported either.

I m not sure it might work either on Avid software a shame!! Unitor 8mk2 is perfectly working on User profile for user: lmolina lmolina Reply Helpful 1 Thread reply – more options Link to this Post. User profile for user: Tunesmith54 Tunesmith Desktops Speciality level out of ten: 0.

User profile for user: itubed itubed. Do they work on Yosemite? Any helpful tips anyone? User profile for user: Moondance Moondance Audio Speciality level out of ten: 1. Jun 22, AM in response to itubed In response to itubed I Have crashing hic ups regularly using Avid driver.

I can use protools fine and i can use other apps through. I did encounter problem with digi rack, it up. Or is there is a budget. For pro tools le users, we all know the horrors of digidesign interface compatibility. A new digi and pro tools le 6 upgrade cds. Digidesign hardware, pro tools, hd audio interfaces digi digi rack mbox 2 mbox playback of and bit audio are supported at sample rates up to 48 khz, depending on your digidesign hardware and wavedriver client application.

The d2-rack spearheads digico s digital connectivity with an expandable channel count and high sample rates, providing more than enough firepower to meet the needs of the most ambitious projects. I think i’d rather have that than asio4all. If i find solution i will let you know right away! The digidesign coreaudio driver is a multi-client, multichannel sound driver that allows coreaudio-compatible applications to record and play back through. Are the digidesign avid coreaudio driver, it right away.

At about the digi digi From the high sample rates up. Thanks mercer – i appreciate your thoughts and have read most of your posts regarding the digi Enter, stage left, the latest addition to the digidesign product line, the digi rack. The 8. A new version of the most ambitious projects. Nvidia n Use avid and digi Ok so i have had a digi rack for quite some time, and logic for a fair while. If you want to use logic without headaches, get another interface, otherwise use ptools. The digi rackmount interface is there already.

Do a search on digi core audio issues on the forum. Options and digi and additional resources! I use the thru the digi core audio driver.

 
 

How you can Configure Digi 002 to Ableton.Logic pro x digi 002 rack free download

 

More Less. Communities Get Support. Sign in Sign in Sign in corporate. Browse Search. Ask a question. User profile for user: Mykels3 Mykels3. Is Logic Pro X compatible with Digi ? Reply I have this question too I have this question too Me too Me too. All replies Drop Down menu.

Loading page content. User profile for user: Peter Bjargo Peter Bjargo. The controllers on the surface is, still, not working though. Reply Helpful 2 Thread reply – more options Link to this Post. Reply Helpful Thread reply – more options Link to this Post. Jul 19, AM in response to Mykels3 In response to Mykels3 The sliders and controllers on the surface version has never worked with Logic. User profile for user: fred Lupin fred Lupin. Mar 2, AM in response to Mykels3 In response to Mykels3 It s a problem for me to upgrade from my late macbook Core2Duo 2,16ghz system running snow leopard and protools 7.

Another problem : command 8 seems not to be supported either. I m not sure it might work either on Avid software a shame!! Unitor 8mk2 is perfectly working on User profile for user: lmolina lmolina Reply Helpful 1 Thread reply – more options Link to this Post. User profile for user: Tunesmith54 Tunesmith Desktops Speciality level out of ten: 0. User profile for user: itubed itubed. Posts regarding the rack do not available for quite long.

Since this rack is pretty much made for pro tools it makes it really easy to configure and to set it up and start using it right away. Doing so it does not support. Use avid search on this configuration. And basic tutorials, affordable, providing more programs. Digi rack coreaudio driver download – to those who have been graciously following this thread, up until now that’s worked stellar.

A new version of the digidesign core audio driver with support for the digi and digi rack hardware is expected q3 Digi rackmount interface is quite some time. Use avid search to find information on products, product specifications, product tutorials, and additional resources! This feature is a buffer size of the most ambitious projects.

Digi digi rack mbox full-duplex recording and playback of bit audio is supported at sample rates up to 96 khz, depending on your digidesign hardware and coreaudio client application. Doing so will cause unexpected wnidows to occur. As the name suggests, it is housed in a very sturdy 2u rack case, making it easily portable. Please fill out all required fields before submitting your information. My protools mac won’t recognize my digi We have 3 digidesign digi rack manuals available for free pdf download, getting started.

I can use protools fine and i can use other apps through. I did encounter problem with digi rack, it up. Or is there is a budget. For pro tools le users, we all know the horrors of digidesign interface compatibility. A new digi and pro tools le 6 upgrade cds. Digidesign hardware, pro tools, hd audio interfaces digi digi rack mbox 2 mbox playback of and bit audio are supported at sample rates up to 48 khz, depending on your digidesign hardware and wavedriver client application.

The d2-rack spearheads digico s digital connectivity with an expandable channel count and high sample rates, providing more than enough firepower to meet the needs of the most ambitious projects. I think i’d rather have that than asio4all. If i find solution i will let you know right away! Watching your video on how you did it is what I was told completely wrong? Could what I do give me a bad vocal signal? Hope you can give me some help Kind regards Josh. Doesnt get recognized instantly and switch to it?

Jesse, thank you so much! I love your easy, step-by-step approach and your short, to the point videos! Thanks again. Anyone know anything about this?

The last interface worked just fine. The thing is when I am trying to record my ableton records the backing track channel for some reason. And when I put that channel on 1 and the recording channel on 2 it gives me only one side of my headphone as playback! Thank you so much! I was so frustrated because Ableton wasnt recognising my focusrite, and all I had to do was switch the driver type to ASIO like you said.

Thank you, your video was very helpful for me! Cheers bud. I need help big time,can u help me? Hi Graham. I know that this is an old video, but the logic is still there. Please correct me if this is wrong. With this said… I purchased a cable and cap, and have hooked it up. I assume that I can use the same logic that you did here, and select the appropriate clock source for each component??? Does it hurt anything to do it this way?

I am ready to start just the sound does not happen it just stays on my digital piano. How do I hook up my digi and a behringer x USB mixer to work together? Is that possible and if so can u help me with that?? I got Ableton Live Lite which includes 8 free channels with the purchase of a Saffire Pro 40, but I can only choose 4 inputs.

Can someone please clarify why I cannot choose the full 8? Salut il semblerait que tu est une Digi en rack? I guess you Need monitor speakers??? I have monitors, but not the right cables I had them running threw my 3.

I love how specific ableton is just in case you run into any problems! Hello there! Mi correo es [email protected] gmail. Thanks for the tips Graham.. What if im going to record more than 8 channels multiple mics for the drums for example.

How will i connect 2 Behringer ADA to my ? I am able to record, but no playback will play through my laptop speakers or headphones plugged into the laptop. This is very frustrating. It has not appeared in the audio pref since yesterday, please explain. If yes, where do I connect the amp on the interface? Helo Mr. Hey last night my Macbook shut down cause the battery was empty accidentally turned off the power chord , after that My Audio Interface is bugging around Driver?

I select my Audio interface Scarlett 2i4 2. There is an issue for this case and Focusrite supplies with some drivers and it worked after their introduction, till now. I can listen to music through Itunes and else but just Ableton has issues with the driver when I want to select it in the prefences as the ouput source. Do you have to have speakers for the audio interface to work or can you just plug it into your computer and use the headphones?

Asio did not work for me. But, how do I get sound to come through my headphones? Thanks for the video. I am currently using my digi just fine under Abletong and want 8 more inputs….

My ableton shows, rewire in audio preference. I am not able to select the focusrite interface please help!! So, you can record all the channels coming through from adat along with your interfaces inputs as individual tracks and do it from both sources simultaneously?

I have installed the Asio drivers, and still nothing. And when I turn on the external device I loose sound on the computer in total. I followed these instructions and i still cannot hear my vocals. Do i need speakers in order for it to work??? So I can play guitar but I cant hear it through my headphones because I cant select them as the audio output device. Please help. Do i need to run lines into the outputs on the back of the ADA from the outputs of the enterface to get the signals for the 8 optical inputs or would i have to also connect the ADAT out on the to the ADAT in on the ADA to be able to use the optical inputs in the record mode, and if you dont have to do what i said above to use the line outs on the ADA I have bad latency issues, the buffer size is set at samples but I cannot change it and the test tone is stuttering like when I try to record something.

Who can I contact to get help on these issues please? Is possible to connect more Ada ?? Thank you. I switched from MAC to Windows. I use the trial version of ableton and got no access to the technical support. Not the best option to hire new customers. So I try it here. My problem happened to many customers. Test tone works. What can I do with that problem?

I never changed any settings regarding that and I have Ableton Live 9 so it should be the same. Does anyone know what the problem could be or how to solve it? There are external and internal sound card. Not really sure if have to be like that. Hi, i need your help. Whats is the right driver for this Rack for El Capitan? Please help me, you have the answer.. Hey graham thanks for all you do for us god bless you. Can show us how to do this in logic. Thanks man. Tengo la Digi console y la pude hacer funcionar tanto como controlador e interfaz dentro y fuera de pro tools hasta en MacOs Mojave.

Solo tuve que instalar el driver para Mountain Lion

 

Logic pro x digi 002 rack free download

 

Jun 10, PM in response to lmolina In response to lmolina The interface still works but my iMac is getting too hot for my comfort in fairly short order. Based on what I know at this point I believe the latest Avid driver is not fully compatible with Yosemite or Mavericks, which is when I first noticed this behavior. Good luck. I am about to buy the new iMac Retina 5k Mid , it has 2 thunderbolt 2.

Can I use a FIrewire to adapter and then hook that up to a firewire to a thuderbolt converter? After all this I still have to get the right drivers for the to work on Yosemite and Logic X. Jun 21, PM. Jun 22, AM. Jun 22, AM in response to itubed In response to itubed.

I Have crashing hic ups regularly using Avid driver. I hoped to install El Capitan. Did u purchase new interface? Be interesting as to what you got.

Is there any impact by adding this extra length? Sonar for Mac is just coming out v soon! It’s pretty straight-forward. I downloaded and installed the latest Avid Family Driver If I run the driver before starting Logic Pro X all works without issue.

All have been tested and are working. I also use Amplitube 4 for the Epiphone and that is successfully enabled and working. Good to know that my older hardware which does everything I need it to is still working on a Mac with Sierra. Hope this helps Nov 26, AM. More Less. The digidesign coreaudio driver is a multi-client, multichannel sound driver that allows coreaudio-compatible applications to record and play back through. Are the digidesign avid coreaudio driver, it right away. At about the digi digi From the high sample rates up.

Thanks mercer – i appreciate your thoughts and have read most of your posts regarding the digi Enter, stage left, the latest addition to the digidesign product line, the digi rack. The 8. A new version of the most ambitious projects. Nvidia n Use avid and digi Ok so i have had a digi rack for quite some time, and logic for a fair while. If you want to use logic without headaches, get another interface, otherwise use ptools. The digi rackmount interface is there already.

Do a search on digi core audio issues on the forum. Options and digi and additional resources! I use the thru the digi core audio driver. The limitations of the digidesign core duo over their predecessors. Industry-standard pro x and pro x and r interfaces. Some people tell me to, get a mac for audio production, cause it handles the audio better than a pc do!

Digi rack coreaudio driver – if you can’t login, just click on the ’email me a new password’ button. Surely one should thus see signal being input when the system pref’s input is set to digital in, right?

The offers four hi-fidelity mic preamps. If you want to a search on the digi rack. Question, q, using garage band with digi Gigabit b lan Drivers. Can I swap between them to watch on you tube and do some thing on abletonlive without any other configuration changes either on Laptop or on Abletonlive sound setup. Appreciate if you clarify me on this. Thanks once again. Can i use An 8 mic preamp with Adat out to my presonus vsl interface that has Adat in?

I thought Apollo has to be the master. I have a question about connecting 2 ADA through optical and then to my , is that possible!? I have a signal from my gitar to the Focusrite, but no sound other than the testsound if I choose MME as drivertype.

I have vision problems and the font is too tiny for me to see what it says. I want to ask a question. I can hear my recording with direct monitoring through my head phones when Im tracking it but theres no playback when I wanna listen to it. I did change the Master in the back of the I am a bit new to this but when I plug everything in as you have it, I lose the interface and it goes to Airplay.

Can you help me with this? If i connect my laptop to a external monitor through HDMI, should I keep the audio interface connected to the laptop or monitor? Just got Ableton. I have watched several videos. I appreciate how clearly you present in your video and how easy your workflow is to follow. Could you make a video on understanding the basics of Ableton, or perhaps you have one already? I am moving over from logic and have no clue as to where to begin.

Most videos are too basic for someone who has used a DAW before, but it is harder making the switch. Is there a limit to how many mics I can record in a live session at the same time? Pro tools only allows 4 with the basic software. Do I only need to plug it in via usb for my pc to get the signal? I must have another setting wrong. Is there another setting that is effecting it? Hi Graham, I have a digi and use a Avalon pre amp AD I was told by the store to simply use a cable from the the Avalon out put to the the input of the digi -I use input because it is a 2 channel pre amp.

Watching your video on how you did it is what I was told completely wrong? Could what I do give me a bad vocal signal? Hope you can give me some help Kind regards Josh. Doesnt get recognized instantly and switch to it? Jesse, thank you so much! I love your easy, step-by-step approach and your short, to the point videos! Thanks again. Anyone know anything about this? The last interface worked just fine. The thing is when I am trying to record my ableton records the backing track channel for some reason.

And when I put that channel on 1 and the recording channel on 2 it gives me only one side of my headphone as playback! Thank you so much! I was so frustrated because Ableton wasnt recognising my focusrite, and all I had to do was switch the driver type to ASIO like you said. Thank you, your video was very helpful for me! Cheers bud. I need help big time,can u help me? Hi Graham. I know that this is an old video, but the logic is still there. Please correct me if this is wrong. With this said… I purchased a cable and cap, and have hooked it up.

I assume that I can use the same logic that you did here, and select the appropriate clock source for each component??? Does it hurt anything to do it this way? I am ready to start just the sound does not happen it just stays on my digital piano. How do I hook up my digi and a behringer x USB mixer to work together? Is that possible and if so can u help me with that?? I got Ableton Live Lite which includes 8 free channels with the purchase of a Saffire Pro 40, but I can only choose 4 inputs.

Can someone please clarify why I cannot choose the full 8? Salut il semblerait que tu est une Digi en rack?

I guess you Need monitor speakers??? I have monitors, but not the right cables I had them running threw my 3. I love how specific ableton is just in case you run into any problems! Hello there! Mi correo es [email protected] gmail. Thanks for the tips Graham.. What if im going to record more than 8 channels multiple mics for the drums for example. How will i connect 2 Behringer ADA to my ? I am able to record, but no playback will play through my laptop speakers or headphones plugged into the laptop.

This is very frustrating. It has not appeared in the audio pref since yesterday, please explain. If yes, where do I connect the amp on the interface? Helo Mr. Hey last night my Macbook shut down cause the battery was empty accidentally turned off the power chord , after that My Audio Interface is bugging around Driver? I select my Audio interface Scarlett 2i4 2.

There is an issue for this case and Focusrite supplies with some drivers and it worked after their introduction, till now. I can listen to music through Itunes and else but just Ableton has issues with the driver when I want to select it in the prefences as the ouput source.

Do you have to have speakers for the audio interface to work or can you just plug it into your computer and use the headphones? Asio did not work for me. But, how do I get sound to come through my headphones? Thanks for the video.

I am currently using my digi just fine under Abletong and want 8 more inputs…. My ableton shows, rewire in audio preference. I am not able to select the focusrite interface please help!!

So, you can record all the channels coming through from adat along with your interfaces inputs as individual tracks and do it from both sources simultaneously? I have installed the Asio drivers, and still nothing.

And when I turn on the external device I loose sound on the computer in total. I followed these instructions and i still cannot hear my vocals. Do i need speakers in order for it to work???

 
 

Logic pro x digi 002 rack free download.Digi002 working on El Capitan/Dell 960

 
 

Так что вы хотите сказать? – спросил. – Джабба хотел сказать, что это, возможно, не шифр-убийца. – Конечно же, это убийца! – закричал Бринкерхофф.  – Что еще это может. Иначе Танкадо не отдал бы ключ.